edge crack
英 [edʒ kræk]
美 [edʒ kræk]
网络 边裂; 边缘裂纹; 边裂纹; 边缘裂缝
双语例句
- Edge crack is one of the main factors affecting quality of heavy plates manufactured by Baosteel.
边裂是影响宝钢厚板质量的一个重要因素。 - Crack propagation from the flameout edge can be modeled by considering an edge crack in the martensite surface from flame cutting.
裂纹从烧割边缘的扩展可模拟为一个从烧割处的马氏体表面起始的边裂纹。 - Method of Strongly Singular Integral Equation for the Torsion of Cylinder with Edge Crack
边裂纹柱扭转的强奇性积分方程解法 - Presents a method that can be conveniently used to calculate the stress intensity factor for the edge crack of a cold expanded hole.
对于残余应力场已知的冷胀孔，用本文方法求孔单边穿透裂纹的应力强度因子是简单和准确的。 - The main characteristics of edge crack have been analyzed. The relation of grades and slab defects with hot rolled product defects is given, and the measure to avoid edge crack is put forward.
分析边裂的主要形态特征，明确钢种、板坯缺陷与热轧板产品缺陷的关系，并提出防止边裂的改进措施。 - Singular integral equation approach for edge crack problems of circular region in antiplane elasticity
反平面弹性圆形域边缘裂纹奇异积分方程方法 - Analysis on Causes of Corner Crack and Edge Crack in Slab
连铸板坯角裂和边裂漏钢原因的分析 - A Slanting Edge Crack Problem in Elastic Half Plane
弹性半平面中的斜边界裂纹问题 - Through the analysis and improvement of semi-plate spring oscillator, the error of mould oscillation, breakout and slab edge crack have been eliminated.
通过对半板簧振动装置的误差进行分析改进，较好地解决了振动偏振、铸机漏钢事故多、铸坯边裂问题。 - Stress intensity factor of dissimilar orthotropic laminate with an edge crack along the interface under anti-plane loading
反平面载荷作用下带界面裂纹的不同正交异性层板的应力分析 - The Application of the Variational Method in A Finite Orthotropic Plate with Edge Crack
变分法在含边裂纹正交各向异性板中的应用 - Control and Analysis on Edge Crack of Hot Rolled Strip Coil Produced by CSP Process
CSP工艺生产热轧板卷边裂的分析和控制 - In this paper, the finite element method was used to compute the dynamic stress intensity factor of thick-walled cylinder with edge crack. The suitable programme and the factors affecting dynamic stress intensity factor was studied.
本文应用有限单元法计算了动态内压下含裂纹厚壁筒的动态应力强度因子K1（t），提供了合理的计算方案，研究了不同动载参量对动态应力强度因子的影响。 - Study of dynamic fracture behaviour on three point bend beam with off center edge crack
含偏置裂纹三点弯曲梁的动态断裂行为研究 - The paper is the first one to deal with the edge crack in an infinite half plane of nonlocal elasticity.
本文第一个按照非局部弹性理论求解了半无限平面边缘裂纹问题。 - Research on the Method to Calculate the Stress Intensity Factor of Asphalt Pavement ′ s Edge Crack
沥青路面表面裂缝应力强度因子计算方法研究 - The time-history curves of the contact force for cantilever with one edge crack and two edge cracks are given in the paper. It is shown from these curves that the contact characteristics between crack faces in a beam under dynamic load.
给出具有一个边裂纹及二个边裂纹的梁在不同冲击载荷下接触力的时程曲线，从中可以看出在动载荷作用下裂纹面接触的一些特点。 - The BIE method computer program, presented in this paper, can be accurately used for the elastoplastic fracture analysis of edge crack or long surface crack in various structural components.
本文提供的边界积分方程法计算机程序，可较精确地用于各种结构的边裂纹或长表面裂纹的弹塑性分析及裂纹尖端张开位移的计算，从而可对这些结构进行断裂分析。 - In this thesis, based on the impermeable boundary conditions, the interaction of a screw dislocation with an interfacial edge crack in a two-phase transversely isotropic MEE medium is investigates through the use of the conformal mapping and the image-dislocation method.
本论文采用不可渗透裂纹边界条件，利用镜像原理和保角变换技术，分析了横观各向同性磁电弹双材料中裂纹和螺位错的相互作用问题。 - Long surface crack of pressure vessel is idealized as a single edge crack of long atrip in this Paper.
本文把压力容器长表面裂纹简化为狭长条的单边裂纹。 - Large quantity of rejected products involving edge crack and strip breakage are prone to occur in hot and cold rolling of the oriented silicon steel sheets due to high brittleness of the steel caused by its high silicon content.
取向硅钢含硅量高，钢质脆性大，在热轧和冷轧过程中容易产生大量边裂及断带轧废。 - Cause analysis and improving measure on edge crack of hot rolled plate
热轧板边裂原因分析及改进措施 - A new method studying the edge crack problem on an elastic half plane
弹性半平面中边界裂纹研究的新方法 - Computation of stress-intensity factors of the orthotropic material specimen with single edge crack by the method of boundary collocation
用边界配置法计算正交各向异性材料单边裂纹试件的应力强度因子 - The stress intensity factors are obtained for a semi-infinite stiffened plate with edge crack by use of the method of alternative iteration and the method of combination of complex stress functions containing unknown coefficients and variational principles.
采用交替迭代法及复应力函数与变分原理相结合的方法求解了含边缘裂纹半无限大加筋板的应力强度因子。 - In this paper, a new method of dynamic fracture analysis of three point bending beam with an edge crack is presented by applying the elementary bending theory of beam and the line spring model.
利用梁的初等弯曲理论和线弹簧模型建立了三点弯曲裂纹梁的动态断裂分析方法，该方法使计算大为简化。 - A Method for Calculating Stress Intensity Factors for the Edge Crack of a Cold Expanded Hole
冷胀孔单边穿透裂纹的应力强度因子计算方法 - Calculations of tearing energy are made for a rubber pure shear specimen with a central crack or a edge crack in the specimen or at the rubber-to-steel bond.
对橡胶纯剪试件中或橡胶与钢性夹具粘结处存在中心裂纹和边缘裂纹时的撕裂能进行了计算。 - All the non-uniform deformation factors can affect the edge crack formation on different degree, the easy cause the non-uniform deformation, the easy cause edge crack production.
能够影响轧坯不均匀变形的因素均会不同程度地影响到边裂的形成，越易造成不均匀变形的因素就越易引起边裂的产生。 - Edge crack is a kind of common defect in the production of hot strip, often in batch appears.
边裂是热轧钢带生产中较为常见的边部缺陷，常以批量出现。